What is this wood joint called?

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP





.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty margin-bottom:0;







up vote
1
down vote

favorite












What is this wood joint called and how difficult is it to accomplish? What tools would I need beside a regular saw?



It would be with 2"x4" wood over 4"x4" wood.



enter image description here






wood joints







share|improve this question





























    up vote
    1
    down vote

    favorite












    What is this wood joint called and how difficult is it to accomplish? What tools would I need beside a regular saw?



    It would be with 2"x4" wood over 4"x4" wood.



    enter image description here






    wood joints







    share|improve this question

























      up vote
      1
      down vote

      favorite









      up vote
      1
      down vote

      favorite











      What is this wood joint called and how difficult is it to accomplish? What tools would I need beside a regular saw?



      It would be with 2"x4" wood over 4"x4" wood.



      enter image description here






      wood joints







      share|improve this question















      What is this wood joint called and how difficult is it to accomplish? What tools would I need beside a regular saw?



      It would be with 2"x4" wood over 4"x4" wood.



      enter image description here






      wood joints




      wood joints






      share|improve this question















      share|improve this question













      share|improve this question




      share|improve this question








      edited 2 hours ago









      mmathis

      6,56142145




      6,56142145










      asked 2 hours ago









      rbhat

      483314




      483314




















          1 Answer
          1






          active

          oldest

          votes

















          up vote
          4
          down vote













          The 2x4s are joined with a half-lap joint (or a variation on a scarf joint). It's unclear from your diagram if there is any joinery holding the 2x4s down to the 4x4 or if they just rest on top of the post.



          Not sure what you mean by a "regular saw", but half laps can be cut by most saws - circular saw and table saw are most common, though you could use a handsaw as well. Simply run the saw across the board multiple times, removing a sliver each time. A bandsaw (or jigsaw with a long enough blade) could be used by tipping the workpiece on its side and cutting the material away that way.



          You could also use a chisel to cut that joint, as well as a router.






          share|improve this answer




















            Your Answer







            StackExchange.ready(function()
            var channelOptions =
            tags: "".split(" "),
            id: "73"
            ;
            initTagRenderer("".split(" "), "".split(" "), channelOptions);

            StackExchange.using("externalEditor", function()
            // Have to fire editor after snippets, if snippets enabled
            if (StackExchange.settings.snippets.snippetsEnabled)
            StackExchange.using("snippets", function()
            createEditor();
            );

            else
            createEditor();

            );

            function createEditor()
            StackExchange.prepareEditor(
            heartbeatType: 'answer',
            convertImagesToLinks: false,
            noModals: false,
            showLowRepImageUploadWarning: true,
            reputationToPostImages: null,
            bindNavPrevention: true,
            postfix: "",
            noCode: true, onDemand: true,
            discardSelector: ".discard-answer"
            ,immediatelyShowMarkdownHelp:true
            );



            );













             

            draft saved


            draft discarded


















            StackExchange.ready(
            function ()
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f148392%2fwhat-is-this-wood-joint-called%23new-answer', 'question_page');

            );

            Post as a guest

















            1 Answer
            1






            active

            oldest

            votes








            1 Answer
            1






            active

            oldest

            votes









            active

            oldest

            votes






            active

            oldest

            votes








            up vote
            4
            down vote













            The 2x4s are joined with a half-lap joint (or a variation on a scarf joint). It's unclear from your diagram if there is any joinery holding the 2x4s down to the 4x4 or if they just rest on top of the post.



            Not sure what you mean by a "regular saw", but half laps can be cut by most saws - circular saw and table saw are most common, though you could use a handsaw as well. Simply run the saw across the board multiple times, removing a sliver each time. A bandsaw (or jigsaw with a long enough blade) could be used by tipping the workpiece on its side and cutting the material away that way.



            You could also use a chisel to cut that joint, as well as a router.






            share|improve this answer
























              up vote
              4
              down vote













              The 2x4s are joined with a half-lap joint (or a variation on a scarf joint). It's unclear from your diagram if there is any joinery holding the 2x4s down to the 4x4 or if they just rest on top of the post.



              Not sure what you mean by a "regular saw", but half laps can be cut by most saws - circular saw and table saw are most common, though you could use a handsaw as well. Simply run the saw across the board multiple times, removing a sliver each time. A bandsaw (or jigsaw with a long enough blade) could be used by tipping the workpiece on its side and cutting the material away that way.



              You could also use a chisel to cut that joint, as well as a router.






              share|improve this answer






















                up vote
                4
                down vote










                up vote
                4
                down vote









                The 2x4s are joined with a half-lap joint (or a variation on a scarf joint). It's unclear from your diagram if there is any joinery holding the 2x4s down to the 4x4 or if they just rest on top of the post.



                Not sure what you mean by a "regular saw", but half laps can be cut by most saws - circular saw and table saw are most common, though you could use a handsaw as well. Simply run the saw across the board multiple times, removing a sliver each time. A bandsaw (or jigsaw with a long enough blade) could be used by tipping the workpiece on its side and cutting the material away that way.



                You could also use a chisel to cut that joint, as well as a router.






                share|improve this answer












                The 2x4s are joined with a half-lap joint (or a variation on a scarf joint). It's unclear from your diagram if there is any joinery holding the 2x4s down to the 4x4 or if they just rest on top of the post.



                Not sure what you mean by a "regular saw", but half laps can be cut by most saws - circular saw and table saw are most common, though you could use a handsaw as well. Simply run the saw across the board multiple times, removing a sliver each time. A bandsaw (or jigsaw with a long enough blade) could be used by tipping the workpiece on its side and cutting the material away that way.



                You could also use a chisel to cut that joint, as well as a router.







                share|improve this answer












                share|improve this answer



                share|improve this answer










                answered 2 hours ago









                mmathis

                6,56142145




                6,56142145



























                     

                    draft saved


                    draft discarded















































                     


                    draft saved


                    draft discarded














                    StackExchange.ready(
                    function ()
                    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f148392%2fwhat-is-this-wood-joint-called%23new-answer', 'question_page');

                    );

                    Post as a guest
































































                    Comments

                    Post a Comment

                    Popular posts from this blog

                    What does second last employer means? [closed]

                    Image
                    Clash Royale CLAN TAG #URR8PPP .everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty margin-bottom:0; up vote -3 down vote favorite Say, for example I have worked in the following companies, Company A => 2010 - 2011 Company B => 2011 - 2012 Company C => 2012 - Till Date Company D => Have offer Now assume Company D is asking to submit documents from my second last employer. So from the list of companies given, which company would be qualified as second last employer? software-industry employer share | improve this question asked Aug 10 '14 at 5:16 Rajaprabhu Aravindasamy 559 1 6 13 closed as off-topic by Jim G., jmort253 ♦ Aug 11 '14 at 1:58 This question appears to be off-topic. The users who voted to close gave this specific reason: "Questions seeking advice on company-specific regulations, agreements, or policies should be directed to your manager or HR department. Questions that address...
                    Read more

                    Installing NextGIS Connect into QGIS 3?

                    Image
                    Clash Royale CLAN TAG #URR8PPP .everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty margin-bottom:0; up vote 1 down vote favorite Just acquired free version of NEXTGIS and trying to install the plugin for QGIS. It tells me it was not designed for version 3 of QGIS. How do I set up the QGIS-NEXTGIS interface then? qgis qgis-plugins nextgis share | improve this question edited 3 hours ago PolyGeo ♦ 51.9k 17 77 233 asked 4 hours ago IanGS 16 4 New contributor IanGS is a new contributor to this site. Take care in asking for clarification, commenting, and answering. Check out our Code of Conduct. add a comment  |  up vote 1 down vote favorite Just acquired free version of NEXTGIS and trying to install the plugin for QGIS. It tells me it was not designed for version 3 of QGIS. How do I set up the QGIS-NEXTGIS interface then? qgis qgis-plugin...
                    Read more

                    One-line joke

                    A one-liner is a joke that is delivered in a single line. A good one-liner is said to be pithy - concise and meaningful. [1] Comedians and actors use this comedic method as part of their act, e.g. Jimmy Carr, Tommy Cooper, Rodney Dangerfield, Norm Macdonald, Ken Dodd, Stewart Francis, Zach Galifianakis, Mitch Hedberg, Anthony Jeselnik, Milton Jones, Shappi Khorsandi, Jay London, Mark Linn-Baker, Demetri Martin, Groucho Marx, Dan Mintz, Emo Philips, Tim Vine, Steven Wright and Henny Youngman and Arnold Schwarzenegger. [ citation needed ] Many fictional characters are also known to deliver one-liners, including James Bond, who usually includes pithy and laconic quips after disposing of a villain. [ citation needed ] Examples "A baby seal walks into a club." "A dyslexic man walks into a bra." (Anonymous) "There are three types of people, those who can count and those who can't." "Venison's dear, isn't it?" (Jimmy Carr) "An escala...
                    Read more