Mixing
Rear wheel power spoke pattern
Clash Royale CLAN TAG#URR8PPP
up vote
1
down vote
favorite
This is my first time posting here.
I have been biking for a few years now and learning little by little how to repair my ride myself.
My latest problem is 4 spokes of my rear wheel (36 spokes) broke, making it like a potato-chip.
It's a pretty old aluminum wheel but people told me the rim and hub were good, so I figured I might as well try to repair it, considering how cheap a spoke is, at least it would be a good learning experience.
I tried the traditional 3x cross but half way through I read about the powerwheel pattern on Sheldon Brown's website, 2 pulling spokes for 1 pushing.
But that is the only information I got.
I'd really want to try lacing my wheel that way but am clueless of how to cross spokes (over, under...) and I don't know what length to buy, etc.
Would anyone know how to do or is it held secret because patented and my only option is to buy one somewhere?
Cheers
spokes rear-wheel power
edited 7 hours ago
Argenti Apparatus
28.7k23271
asked 9 hours ago
frances rhodes
61
New contributor
frances rhodes is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
 |Â
show 3 more comments
up vote
1
down vote
favorite
This is my first time posting here.
I have been biking for a few years now and learning little by little how to repair my ride myself.
My latest problem is 4 spokes of my rear wheel (36 spokes) broke, making it like a potato-chip.
It's a pretty old aluminum wheel but people told me the rim and hub were good, so I figured I might as well try to repair it, considering how cheap a spoke is, at least it would be a good learning experience.
I tried the traditional 3x cross but half way through I read about the powerwheel pattern on Sheldon Brown's website, 2 pulling spokes for 1 pushing.
But that is the only information I got.
I'd really want to try lacing my wheel that way but am clueless of how to cross spokes (over, under...) and I don't know what length to buy, etc.
Would anyone know how to do or is it held secret because patented and my only option is to buy one somewhere?
Cheers
spokes rear-wheel power
edited 7 hours ago
Argenti Apparatus
28.7k23271
asked 9 hours ago
frances rhodes
61
New contributor
frances rhodes is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
BTW, the "official" term is "tacoed" -- your wheel is tacoed.
– Daniel R Hicks
8 hours ago
1
As to replacing the spokes, it's hard enough for a beginner to do a simple pattern. I'd recommend you first simply try to replace broken spokes, and if they keep breaking (usually because the wheel is "worn out" at 20-50k miles) then re-lace using the original pattern. Using the 2x1 cross that you describe would be very tricky and likely cause more problems than it would solve. (And, as Rider_X hints, Sheldon is given to jokes and may be making one here.)
– Daniel R Hicks
8 hours ago
ok, thank you for the advice. I'll relace it like it was originally, a 3x cross pattern.
– frances rhodes
8 hours ago
@francesrhodes did you unlace the wheel completely or something?
– Criggie
6 hours ago
If it's not obvious from the POWerwheel page itself, it and other joke ShelBroCo products are listed on sheldonbrown.com/bicycleHumor.html
– ojs
5 hours ago
 |Â
show 3 more comments
up vote
1
down vote
favorite
up vote
1
down vote
favorite
This is my first time posting here.
I have been biking for a few years now and learning little by little how to repair my ride myself.
My latest problem is 4 spokes of my rear wheel (36 spokes) broke, making it like a potato-chip.
It's a pretty old aluminum wheel but people told me the rim and hub were good, so I figured I might as well try to repair it, considering how cheap a spoke is, at least it would be a good learning experience.
I tried the traditional 3x cross but half way through I read about the powerwheel pattern on Sheldon Brown's website, 2 pulling spokes for 1 pushing.
But that is the only information I got.
I'd really want to try lacing my wheel that way but am clueless of how to cross spokes (over, under...) and I don't know what length to buy, etc.
Would anyone know how to do or is it held secret because patented and my only option is to buy one somewhere?
Cheers
spokes rear-wheel power
edited 7 hours ago
Argenti Apparatus
28.7k23271
asked 9 hours ago
frances rhodes
61
New contributor
frances rhodes is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
This is my first time posting here.
I have been biking for a few years now and learning little by little how to repair my ride myself.
My latest problem is 4 spokes of my rear wheel (36 spokes) broke, making it like a potato-chip.
It's a pretty old aluminum wheel but people told me the rim and hub were good, so I figured I might as well try to repair it, considering how cheap a spoke is, at least it would be a good learning experience.
I tried the traditional 3x cross but half way through I read about the powerwheel pattern on Sheldon Brown's website, 2 pulling spokes for 1 pushing.
But that is the only information I got.
I'd really want to try lacing my wheel that way but am clueless of how to cross spokes (over, under...) and I don't know what length to buy, etc.
Would anyone know how to do or is it held secret because patented and my only option is to buy one somewhere?
Cheers
spokes rear-wheel power
spokes rear-wheel power
edited 7 hours ago
Argenti Apparatus
28.7k23271
asked 9 hours ago
frances rhodes
61
New contributor
frances rhodes is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 7 hours ago
Argenti Apparatus
28.7k23271
asked 9 hours ago
frances rhodes
61
New contributor
frances rhodes is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 7 hours ago
Argenti Apparatus
28.7k23271
edited 7 hours ago
Argenti Apparatus
28.7k23271
edited 7 hours ago
Argenti Apparatus
28.7k23271
28.7k23271
asked 9 hours ago
frances rhodes
61
New contributor
frances rhodes is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 9 hours ago
frances rhodes
61
asked 9 hours ago
frances rhodes
61
61
New contributor
frances rhodes is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
frances rhodes is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
frances rhodes is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
BTW, the "official" term is "tacoed" -- your wheel is tacoed.
– Daniel R Hicks
8 hours ago
1
As to replacing the spokes, it's hard enough for a beginner to do a simple pattern. I'd recommend you first simply try to replace broken spokes, and if they keep breaking (usually because the wheel is "worn out" at 20-50k miles) then re-lace using the original pattern. Using the 2x1 cross that you describe would be very tricky and likely cause more problems than it would solve. (And, as Rider_X hints, Sheldon is given to jokes and may be making one here.)
– Daniel R Hicks
8 hours ago
ok, thank you for the advice. I'll relace it like it was originally, a 3x cross pattern.
– frances rhodes
8 hours ago
@francesrhodes did you unlace the wheel completely or something?
– Criggie
6 hours ago
If it's not obvious from the POWerwheel page itself, it and other joke ShelBroCo products are listed on sheldonbrown.com/bicycleHumor.html
– ojs
5 hours ago
 |Â
show 3 more comments
BTW, the "official" term is "tacoed" -- your wheel is tacoed.
– Daniel R Hicks
8 hours ago
1
As to replacing the spokes, it's hard enough for a beginner to do a simple pattern. I'd recommend you first simply try to replace broken spokes, and if they keep breaking (usually because the wheel is "worn out" at 20-50k miles) then re-lace using the original pattern. Using the 2x1 cross that you describe would be very tricky and likely cause more problems than it would solve. (And, as Rider_X hints, Sheldon is given to jokes and may be making one here.)
– Daniel R Hicks
8 hours ago
ok, thank you for the advice. I'll relace it like it was originally, a 3x cross pattern.
– frances rhodes
8 hours ago
@francesrhodes did you unlace the wheel completely or something?
– Criggie
6 hours ago
If it's not obvious from the POWerwheel page itself, it and other joke ShelBroCo products are listed on sheldonbrown.com/bicycleHumor.html
– ojs
5 hours ago
BTW, the "official" term is "tacoed" -- your wheel is tacoed.
– Daniel R Hicks
8 hours ago
BTW, the "official" term is "tacoed" -- your wheel is tacoed.
– Daniel R Hicks
8 hours ago
1
1
As to replacing the spokes, it's hard enough for a beginner to do a simple pattern. I'd recommend you first simply try to replace broken spokes, and if they keep breaking (usually because the wheel is "worn out" at 20-50k miles) then re-lace using the original pattern. Using the 2x1 cross that you describe would be very tricky and likely cause more problems than it would solve. (And, as Rider_X hints, Sheldon is given to jokes and may be making one here.)
– Daniel R Hicks
8 hours ago
As to replacing the spokes, it's hard enough for a beginner to do a simple pattern. I'd recommend you first simply try to replace broken spokes, and if they keep breaking (usually because the wheel is "worn out" at 20-50k miles) then re-lace using the original pattern. Using the 2x1 cross that you describe would be very tricky and likely cause more problems than it would solve. (And, as Rider_X hints, Sheldon is given to jokes and may be making one here.)
– Daniel R Hicks
8 hours ago
ok, thank you for the advice. I'll relace it like it was originally, a 3x cross pattern.
– frances rhodes
8 hours ago
ok, thank you for the advice. I'll relace it like it was originally, a 3x cross pattern.
– frances rhodes
8 hours ago
@francesrhodes did you unlace the wheel completely or something?
– Criggie
6 hours ago
@francesrhodes did you unlace the wheel completely or something?
– Criggie
6 hours ago
If it's not obvious from the POWerwheel page itself, it and other joke ShelBroCo products are listed on sheldonbrown.com/bicycleHumor.html
– ojs
5 hours ago
If it's not obvious from the POWerwheel page itself, it and other joke ShelBroCo products are listed on sheldonbrown.com/bicycleHumor.html
– ojs
5 hours ago
 |Â
show 3 more comments
2 Answers
2
active
oldest
votes
up vote
5
down vote
If you are only replacing the 4 broken spokes then you will need to duplicate the wheel's spoke pattern.
If you are re-lacing the wheel with new spokes, a 3-cross spoke pattern is time proven pattern that is great for a first time wheel build. It is easy to implement, it builds a very strong wheel and it makes re-truing the wheel a straightforward. All of these are great features for your first wheel build.
After building, ride it a bit, and see how you did before trying to chase more exotic spoke patterns.
My reading of Sheldon's POWerwheel page is that the pattern is a bit of a joke, but may actually work. Even if it does work, it wouldn't be a good first time build as tension the wheel would be more difficult than a standard symmetrical pattern such as a 3-cross.
——
Update: check Jeffery Bell’s answer this was an April fools day joke (it’s a bit hard to spot now with all the ads, but at the bottom it is dated for April 1. Crazy that some have apparently tried the pattern in real life.
Please give Jeffery an upvote.
answered 9 hours ago
Rider_X
23.1k14386
ok, thanks for answering so fast. I already laced the wheel with a 3x pattern (the way it was laced originally) but wanted to try a supposedly better one, so I disassembled everything to start a new one... I'll relace it with a standard 3x crossing pattern and see how it turns out.
– frances rhodes
9 hours ago
Are you planning to true the wheel yourself?
– P. Barney
6 hours ago
The idea of the POWerwheel is new to me, but it does fit with my experience: There are two factors that make a spoke likely to fail, 1. that the spoke attaches to the hub from the inside (higher bending force at the bend), and 2. that the spoke is an accelerating one mounted on the rear wheel. I already mitigate these two factors by ensuring that no spoke is both an inner one and an accelerating one, but the accelerating ones remain the ones that break. However, the only benefit of a POWerwheel should be less danger of breaking spokes. Also: Disk brakes may change this into the opposite.
– cmaster
5 hours ago
@p-barney yes, I want to do it myself, I want to learn how to fix everything alone to eventually be able to build bikes from scratch
– frances rhodes
3 hours ago
@cmaster I looked into changing the breaks to a more modern system but my bike is from the 70s, so it would require serious modifications in order to do that, including replacing parts such as the fork... which I don't want to do
– frances rhodes
3 hours ago
add a comment |Â
up vote
2
down vote
The most important part of the page is "Since April 1".
This is Sheldon Brown's annual April Fool prank.
Search for the rest of the ShelBroCo articles in rec.bicycles.tech and they were all posted on April 1.
answered 4 hours ago
Jeffrey Bell
212
New contributor
Jeffrey Bell is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Good catch! I missed that date reference at the bottom of the page (there is so much advertising, it’s almost unreadable now). The crazy part is that people claim it worked in real life
– Rider_X
1 hour ago
add a comment |Â
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
5
down vote
If you are only replacing the 4 broken spokes then you will need to duplicate the wheel's spoke pattern.
If you are re-lacing the wheel with new spokes, a 3-cross spoke pattern is time proven pattern that is great for a first time wheel build. It is easy to implement, it builds a very strong wheel and it makes re-truing the wheel a straightforward. All of these are great features for your first wheel build.
After building, ride it a bit, and see how you did before trying to chase more exotic spoke patterns.
My reading of Sheldon's POWerwheel page is that the pattern is a bit of a joke, but may actually work. Even if it does work, it wouldn't be a good first time build as tension the wheel would be more difficult than a standard symmetrical pattern such as a 3-cross.
——
Update: check Jeffery Bell’s answer this was an April fools day joke (it’s a bit hard to spot now with all the ads, but at the bottom it is dated for April 1. Crazy that some have apparently tried the pattern in real life.
Please give Jeffery an upvote.
answered 9 hours ago
Rider_X
23.1k14386
ok, thanks for answering so fast. I already laced the wheel with a 3x pattern (the way it was laced originally) but wanted to try a supposedly better one, so I disassembled everything to start a new one... I'll relace it with a standard 3x crossing pattern and see how it turns out.
– frances rhodes
9 hours ago
Are you planning to true the wheel yourself?
– P. Barney
6 hours ago
The idea of the POWerwheel is new to me, but it does fit with my experience: There are two factors that make a spoke likely to fail, 1. that the spoke attaches to the hub from the inside (higher bending force at the bend), and 2. that the spoke is an accelerating one mounted on the rear wheel. I already mitigate these two factors by ensuring that no spoke is both an inner one and an accelerating one, but the accelerating ones remain the ones that break. However, the only benefit of a POWerwheel should be less danger of breaking spokes. Also: Disk brakes may change this into the opposite.
– cmaster
5 hours ago
@p-barney yes, I want to do it myself, I want to learn how to fix everything alone to eventually be able to build bikes from scratch
– frances rhodes
3 hours ago
@cmaster I looked into changing the breaks to a more modern system but my bike is from the 70s, so it would require serious modifications in order to do that, including replacing parts such as the fork... which I don't want to do
– frances rhodes
3 hours ago
add a comment |Â
up vote
5
down vote
If you are only replacing the 4 broken spokes then you will need to duplicate the wheel's spoke pattern.
If you are re-lacing the wheel with new spokes, a 3-cross spoke pattern is time proven pattern that is great for a first time wheel build. It is easy to implement, it builds a very strong wheel and it makes re-truing the wheel a straightforward. All of these are great features for your first wheel build.
After building, ride it a bit, and see how you did before trying to chase more exotic spoke patterns.
My reading of Sheldon's POWerwheel page is that the pattern is a bit of a joke, but may actually work. Even if it does work, it wouldn't be a good first time build as tension the wheel would be more difficult than a standard symmetrical pattern such as a 3-cross.
——
Update: check Jeffery Bell’s answer this was an April fools day joke (it’s a bit hard to spot now with all the ads, but at the bottom it is dated for April 1. Crazy that some have apparently tried the pattern in real life.
Please give Jeffery an upvote.
answered 9 hours ago
Rider_X
23.1k14386
ok, thanks for answering so fast. I already laced the wheel with a 3x pattern (the way it was laced originally) but wanted to try a supposedly better one, so I disassembled everything to start a new one... I'll relace it with a standard 3x crossing pattern and see how it turns out.
– frances rhodes
9 hours ago
Are you planning to true the wheel yourself?
– P. Barney
6 hours ago
The idea of the POWerwheel is new to me, but it does fit with my experience: There are two factors that make a spoke likely to fail, 1. that the spoke attaches to the hub from the inside (higher bending force at the bend), and 2. that the spoke is an accelerating one mounted on the rear wheel. I already mitigate these two factors by ensuring that no spoke is both an inner one and an accelerating one, but the accelerating ones remain the ones that break. However, the only benefit of a POWerwheel should be less danger of breaking spokes. Also: Disk brakes may change this into the opposite.
– cmaster
5 hours ago
@p-barney yes, I want to do it myself, I want to learn how to fix everything alone to eventually be able to build bikes from scratch
– frances rhodes
3 hours ago
@cmaster I looked into changing the breaks to a more modern system but my bike is from the 70s, so it would require serious modifications in order to do that, including replacing parts such as the fork... which I don't want to do
– frances rhodes
3 hours ago
add a comment |Â
up vote
5
down vote
up vote
5
down vote
If you are only replacing the 4 broken spokes then you will need to duplicate the wheel's spoke pattern.
If you are re-lacing the wheel with new spokes, a 3-cross spoke pattern is time proven pattern that is great for a first time wheel build. It is easy to implement, it builds a very strong wheel and it makes re-truing the wheel a straightforward. All of these are great features for your first wheel build.
After building, ride it a bit, and see how you did before trying to chase more exotic spoke patterns.
My reading of Sheldon's POWerwheel page is that the pattern is a bit of a joke, but may actually work. Even if it does work, it wouldn't be a good first time build as tension the wheel would be more difficult than a standard symmetrical pattern such as a 3-cross.
——
Update: check Jeffery Bell’s answer this was an April fools day joke (it’s a bit hard to spot now with all the ads, but at the bottom it is dated for April 1. Crazy that some have apparently tried the pattern in real life.
Please give Jeffery an upvote.
answered 9 hours ago
Rider_X
23.1k14386
If you are only replacing the 4 broken spokes then you will need to duplicate the wheel's spoke pattern.
If you are re-lacing the wheel with new spokes, a 3-cross spoke pattern is time proven pattern that is great for a first time wheel build. It is easy to implement, it builds a very strong wheel and it makes re-truing the wheel a straightforward. All of these are great features for your first wheel build.
After building, ride it a bit, and see how you did before trying to chase more exotic spoke patterns.
My reading of Sheldon's POWerwheel page is that the pattern is a bit of a joke, but may actually work. Even if it does work, it wouldn't be a good first time build as tension the wheel would be more difficult than a standard symmetrical pattern such as a 3-cross.
——
Update: check Jeffery Bell’s answer this was an April fools day joke (it’s a bit hard to spot now with all the ads, but at the bottom it is dated for April 1. Crazy that some have apparently tried the pattern in real life.
Please give Jeffery an upvote.
answered 9 hours ago
Rider_X
23.1k14386
edited 1 hour ago
answered 9 hours ago
Rider_X
23.1k14386
answered 9 hours ago
Rider_X
23.1k14386
answered 9 hours ago
Rider_X
23.1k14386
23.1k14386
ok, thanks for answering so fast. I already laced the wheel with a 3x pattern (the way it was laced originally) but wanted to try a supposedly better one, so I disassembled everything to start a new one... I'll relace it with a standard 3x crossing pattern and see how it turns out.
– frances rhodes
9 hours ago
Are you planning to true the wheel yourself?
– P. Barney
6 hours ago
The idea of the POWerwheel is new to me, but it does fit with my experience: There are two factors that make a spoke likely to fail, 1. that the spoke attaches to the hub from the inside (higher bending force at the bend), and 2. that the spoke is an accelerating one mounted on the rear wheel. I already mitigate these two factors by ensuring that no spoke is both an inner one and an accelerating one, but the accelerating ones remain the ones that break. However, the only benefit of a POWerwheel should be less danger of breaking spokes. Also: Disk brakes may change this into the opposite.
– cmaster
5 hours ago
@p-barney yes, I want to do it myself, I want to learn how to fix everything alone to eventually be able to build bikes from scratch
– frances rhodes
3 hours ago
@cmaster I looked into changing the breaks to a more modern system but my bike is from the 70s, so it would require serious modifications in order to do that, including replacing parts such as the fork... which I don't want to do
– frances rhodes
3 hours ago
add a comment |Â
ok, thanks for answering so fast. I already laced the wheel with a 3x pattern (the way it was laced originally) but wanted to try a supposedly better one, so I disassembled everything to start a new one... I'll relace it with a standard 3x crossing pattern and see how it turns out.
– frances rhodes
9 hours ago
Are you planning to true the wheel yourself?
– P. Barney
6 hours ago
The idea of the POWerwheel is new to me, but it does fit with my experience: There are two factors that make a spoke likely to fail, 1. that the spoke attaches to the hub from the inside (higher bending force at the bend), and 2. that the spoke is an accelerating one mounted on the rear wheel. I already mitigate these two factors by ensuring that no spoke is both an inner one and an accelerating one, but the accelerating ones remain the ones that break. However, the only benefit of a POWerwheel should be less danger of breaking spokes. Also: Disk brakes may change this into the opposite.
– cmaster
5 hours ago
@p-barney yes, I want to do it myself, I want to learn how to fix everything alone to eventually be able to build bikes from scratch
– frances rhodes
3 hours ago
@cmaster I looked into changing the breaks to a more modern system but my bike is from the 70s, so it would require serious modifications in order to do that, including replacing parts such as the fork... which I don't want to do
– frances rhodes
3 hours ago
ok, thanks for answering so fast. I already laced the wheel with a 3x pattern (the way it was laced originally) but wanted to try a supposedly better one, so I disassembled everything to start a new one... I'll relace it with a standard 3x crossing pattern and see how it turns out.
– frances rhodes
9 hours ago
ok, thanks for answering so fast. I already laced the wheel with a 3x pattern (the way it was laced originally) but wanted to try a supposedly better one, so I disassembled everything to start a new one... I'll relace it with a standard 3x crossing pattern and see how it turns out.
– frances rhodes
9 hours ago
Are you planning to true the wheel yourself?
– P. Barney
6 hours ago
Are you planning to true the wheel yourself?
– P. Barney
6 hours ago
The idea of the POWerwheel is new to me, but it does fit with my experience: There are two factors that make a spoke likely to fail, 1. that the spoke attaches to the hub from the inside (higher bending force at the bend), and 2. that the spoke is an accelerating one mounted on the rear wheel. I already mitigate these two factors by ensuring that no spoke is both an inner one and an accelerating one, but the accelerating ones remain the ones that break. However, the only benefit of a POWerwheel should be less danger of breaking spokes. Also: Disk brakes may change this into the opposite.
– cmaster
5 hours ago
The idea of the POWerwheel is new to me, but it does fit with my experience: There are two factors that make a spoke likely to fail, 1. that the spoke attaches to the hub from the inside (higher bending force at the bend), and 2. that the spoke is an accelerating one mounted on the rear wheel. I already mitigate these two factors by ensuring that no spoke is both an inner one and an accelerating one, but the accelerating ones remain the ones that break. However, the only benefit of a POWerwheel should be less danger of breaking spokes. Also: Disk brakes may change this into the opposite.
– cmaster
5 hours ago
@p-barney yes, I want to do it myself, I want to learn how to fix everything alone to eventually be able to build bikes from scratch
– frances rhodes
3 hours ago
@p-barney yes, I want to do it myself, I want to learn how to fix everything alone to eventually be able to build bikes from scratch
– frances rhodes
3 hours ago
@cmaster I looked into changing the breaks to a more modern system but my bike is from the 70s, so it would require serious modifications in order to do that, including replacing parts such as the fork... which I don't want to do
– frances rhodes
3 hours ago
@cmaster I looked into changing the breaks to a more modern system but my bike is from the 70s, so it would require serious modifications in order to do that, including replacing parts such as the fork... which I don't want to do
– frances rhodes
3 hours ago
add a comment |Â
up vote
2
down vote
The most important part of the page is "Since April 1".
This is Sheldon Brown's annual April Fool prank.
Search for the rest of the ShelBroCo articles in rec.bicycles.tech and they were all posted on April 1.
answered 4 hours ago
Jeffrey Bell
212
New contributor
Jeffrey Bell is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Good catch! I missed that date reference at the bottom of the page (there is so much advertising, it’s almost unreadable now). The crazy part is that people claim it worked in real life
– Rider_X
1 hour ago
add a comment |Â
up vote
2
down vote
The most important part of the page is "Since April 1".
This is Sheldon Brown's annual April Fool prank.
Search for the rest of the ShelBroCo articles in rec.bicycles.tech and they were all posted on April 1.
answered 4 hours ago
Jeffrey Bell
212
New contributor
Jeffrey Bell is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Good catch! I missed that date reference at the bottom of the page (there is so much advertising, it’s almost unreadable now). The crazy part is that people claim it worked in real life
– Rider_X
1 hour ago
add a comment |Â
up vote
2
down vote
up vote
2
down vote
The most important part of the page is "Since April 1".
This is Sheldon Brown's annual April Fool prank.
Search for the rest of the ShelBroCo articles in rec.bicycles.tech and they were all posted on April 1.
answered 4 hours ago
Jeffrey Bell
212
New contributor
Jeffrey Bell is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
The most important part of the page is "Since April 1".
This is Sheldon Brown's annual April Fool prank.
Search for the rest of the ShelBroCo articles in rec.bicycles.tech and they were all posted on April 1.
answered 4 hours ago
Jeffrey Bell
212
New contributor
Jeffrey Bell is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 4 hours ago
Jeffrey Bell
212
New contributor
Jeffrey Bell is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 4 hours ago
Jeffrey Bell
212
answered 4 hours ago
Jeffrey Bell
212
212
New contributor
Jeffrey Bell is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Jeffrey Bell is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Jeffrey Bell is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Good catch! I missed that date reference at the bottom of the page (there is so much advertising, it’s almost unreadable now). The crazy part is that people claim it worked in real life
– Rider_X
1 hour ago
add a comment |Â
Good catch! I missed that date reference at the bottom of the page (there is so much advertising, it’s almost unreadable now). The crazy part is that people claim it worked in real life
– Rider_X
1 hour ago
Good catch! I missed that date reference at the bottom of the page (there is so much advertising, it’s almost unreadable now). The crazy part is that people claim it worked in real life
– Rider_X
1 hour ago
Good catch! I missed that date reference at the bottom of the page (there is so much advertising, it’s almost unreadable now). The crazy part is that people claim it worked in real life
– Rider_X
1 hour ago
add a comment |Â
frances rhodes is a new contributor. Be nice, and check out our Code of Conduct.
frances rhodes is a new contributor. Be nice, and check out our Code of Conduct.
frances rhodes is a new contributor. Be nice, and check out our Code of Conduct.
frances rhodes is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f57749%2frear-wheel-power-spoke-pattern%23new-answer', 'question_page');
);
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
BTW, the "official" term is "tacoed" -- your wheel is tacoed.
– Daniel R Hicks
8 hours ago
1
As to replacing the spokes, it's hard enough for a beginner to do a simple pattern. I'd recommend you first simply try to replace broken spokes, and if they keep breaking (usually because the wheel is "worn out" at 20-50k miles) then re-lace using the original pattern. Using the 2x1 cross that you describe would be very tricky and likely cause more problems than it would solve. (And, as Rider_X hints, Sheldon is given to jokes and may be making one here.)
– Daniel R Hicks
8 hours ago
ok, thank you for the advice. I'll relace it like it was originally, a 3x cross pattern.
– frances rhodes
8 hours ago
@francesrhodes did you unlace the wheel completely or something?
– Criggie
6 hours ago
If it's not obvious from the POWerwheel page itself, it and other joke ShelBroCo products are listed on sheldonbrown.com/bicycleHumor.html
– ojs
5 hours ago