Mixing
Replace part of the element in a List of points
Clash Royale CLAN TAG#URR8PPP
up vote
1
down vote
favorite
I have a question about the list of points - in the list below I would like to change the 3rd value of each point to another - like this:
x, y, 0 to (x, y, 0.08}
Y09POINTS=0.028684, 0.7, 0., 0.0286303, 0.706848, 0., 0.0282852, 0.75,
0., 0.0287183, 0.793591, 0., 0.0287511, 0.8, 0., 0.03,
0.832036, 0., 0.0309524, 0.85, 0., 0.04, 0.880317,
0., 0.0479972, 0.9, 0., 0.05, 0.902169, 0., 0.0506499,
0.903249, 0., 0.06, 0.917023, 0., 0.0634705, 0.917352,
0., 0.07, 0.916915, 0., 0.0727888, 0.913944, 0., 0.08,
0.905785, 0., 0.0814746, 0.907373, 0., 0.09, 0.916915,
0., 0.0933178, 0.916589, 0., 0.1, 0.917023, 0., 0.10252,
0.912598, 0., 0.11, 0.902169, 0., 0.110335, 0.901676,
0., 0.112003, 0.9, 0., 0.117299, 0.886497, 0., 0.12, 0.880317,
0., 0.123646, 0.868231, 0., 0.129048, 0.85, 0., 0.129185,
0.845923, 0., 0.13, 0.832036, 0., 0.130918, 0.80459,
0., 0.131249, 0.8, 0., 0.131673, 0.758365, 0., 0.131715, 0.75,
0., 0.13137, 0.706848, 0., 0.131316, 0.7, 0., 0.131307,
0.693466, 0., 0.13115, 0.65, 0., 0.130924, 0.604621,
0., 0.13088, 0.6, 0., 0.130787, 0.553935, 0., 0.130798, 0.55,
0., 0.130773, 0.503866, 0., 0.130751, 0.5, 0., 0.130775,
0.453875, 0., 0.130798, 0.45, 0., 0.130893, 0.404463,
0., 0.13088, 0.4, 0., 0.130924, 0.395379, 0., 0.13115, 0.35,
0., 0.131307, 0.306534, 0., 0.131316, 0.3, 0., 0.13165,
0.258251, 0., 0.131715, 0.25, 0., 0.131282, 0.206409,
0., 0.131249, 0.2, 0., 0.130918, 0.19541, 0., 0.13, 0.167964,
0., 0.129048, 0.15, 0., 0.12, 0.119683, 0., 0.117299,
0.113503, 0., 0.112003, 0.1, 0., 0.110335, 0.0983238,
0., 0.11, 0.097831, 0., 0.10935, 0.0967508, 0., 0.1,
0.0829773, 0., 0.0965295, 0.0826475, 0., 0.09, 0.0830853,
0., 0.0814746, 0.0926271, 0., 0.08, 0.094215, 0., 0.0785254,
0.0926271, 0., 0.07, 0.0830853, 0., 0.0634705, 0.0826475,
0., 0.06, 0.0829773, 0., 0.0574805, 0.0874023, 0., 0.05,
0.097831, 0., 0.0496648, 0.0983238, 0., 0.0479972, 0.1,
0., 0.04, 0.119683, 0., 0.0363538, 0.131769, 0., 0.0309524,
0.15, 0., 0.0308154, 0.154077, 0., 0.03, 0.167964,
0., 0.029082, 0.19541, 0., 0.0287511, 0.2, 0., 0.0283271,
0.241635, 0., 0.0282852, 0.25, 0., 0.0286303, 0.293152,
0., 0.028684, 0.3, 0., 0.028842, 0.34421, 0., 0.0288502, 0.35,
0., 0.0290759, 0.395379, 0., 0.0291196, 0.4, 0., 0.029213,
0.446065, 0., 0.0292019, 0.45, 0., 0.0292269, 0.496134,
0., 0.0292492, 0.5, 0., 0.0292249, 0.546125, 0., 0.0292019,
0.55, 0., 0.0291073, 0.595537, 0., 0.0291196, 0.6,
0., 0.0289033, 0.644517, 0., 0.0288502, 0.65, 0., 0.0286931,
0.693466, 0., 0.028684, 0.7, 0.
If he uses the ReplacePart function, the effect is not what it should be (i want) - it's below.
After the whole operation, I would like to view the points using ListPlot3D.
Could someone help me with this issue?
ReplacePart[Y09POINTS, 3 -> 0.08]
0.028684, 0.7, 0., 0.0286303, 0.706848, 0., 0.08, 0.0287183,
0.793591, 0., 0.0287511, 0.8, 0., 0.03, 0.832036,
0., 0.0309524, 0.85, 0., 0.04, 0.880317, 0., 0.0479972, 0.9,
0., 0.05, 0.902169, 0., 0.0506499, 0.903249, 0., 0.06,
0.917023, 0., 0.0634705, 0.917352, 0., 0.07, 0.916915,
0., 0.0727888, 0.913944, 0., 0.08, 0.905785, 0., 0.0814746,
0.907373, 0., 0.09, 0.916915, 0., 0.0933178, 0.916589,
0., 0.1, 0.917023, 0., 0.10252, 0.912598, 0., 0.11, 0.902169,
0., 0.110335, 0.901676, 0., 0.112003, 0.9, 0., 0.117299,
0.886497, 0., 0.12, 0.880317, 0., 0.123646, 0.868231,
0., 0.129048, 0.85, 0., 0.129185, 0.845923, 0., 0.13,
0.832036, 0., 0.130918, 0.80459, 0., 0.131249, 0.8,
0., 0.131673, 0.758365, 0., 0.131715, 0.75, 0., 0.13137,
0.706848, 0., 0.131316, 0.7, 0., 0.131307, 0.693466,
0., 0.13115, 0.65, 0., 0.130924, 0.604621, 0., 0.13088, 0.6,
0., 0.130787, 0.553935, 0., 0.130798, 0.55, 0., 0.130773,
0.503866, 0., 0.130751, 0.5, 0., 0.130775, 0.453875,
0., 0.130798, 0.45, 0., 0.130893, 0.404463, 0., 0.13088, 0.4,
0., 0.130924, 0.395379, 0., 0.13115, 0.35, 0., 0.131307,
0.306534, 0., 0.131316, 0.3, 0., 0.13165, 0.258251,
0., 0.131715, 0.25, 0., 0.131282, 0.206409, 0., 0.131249, 0.2,
0., 0.130918, 0.19541, 0., 0.13, 0.167964, 0., 0.129048,
0.15, 0., 0.12, 0.119683, 0., 0.117299, 0.113503,
0., 0.112003, 0.1, 0., 0.110335, 0.0983238, 0., 0.11,
0.097831, 0., 0.10935, 0.0967508, 0., 0.1, 0.0829773,
0., 0.0965295, 0.0826475, 0., 0.09, 0.0830853, 0., 0.0814746,
0.0926271, 0., 0.08, 0.094215, 0., 0.0785254, 0.0926271,
0., 0.07, 0.0830853, 0., 0.0634705, 0.0826475, 0., 0.06,
0.0829773, 0., 0.0574805, 0.0874023, 0., 0.05, 0.097831,
0., 0.0496648, 0.0983238, 0., 0.0479972, 0.1, 0., 0.04,
0.119683, 0., 0.0363538, 0.131769, 0., 0.0309524, 0.15,
0., 0.0308154, 0.154077, 0., 0.03, 0.167964, 0., 0.029082,
0.19541, 0., 0.0287511, 0.2, 0., 0.0283271, 0.241635,
0., 0.0282852, 0.25, 0., 0.0286303, 0.293152, 0., 0.028684,
0.3, 0., 0.028842, 0.34421, 0., 0.0288502, 0.35,
0., 0.0290759, 0.395379, 0., 0.0291196, 0.4, 0., 0.029213,
0.446065, 0., 0.0292019, 0.45, 0., 0.0292269, 0.496134,
0., 0.0292492, 0.5, 0., 0.0292249, 0.546125, 0., 0.0292019,
0.55, 0., 0.0291073, 0.595537, 0., 0.0291196, 0.6,
0., 0.0289033, 0.644517, 0., 0.0288502, 0.65, 0., 0.0286931,
0.693466, 0., 0.028684, 0.7, 0.
list-manipulation
asked 1 hour ago
Arek
133
New contributor
Arek is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |Â
up vote
1
down vote
favorite
I have a question about the list of points - in the list below I would like to change the 3rd value of each point to another - like this:
x, y, 0 to (x, y, 0.08}
Y09POINTS=0.028684, 0.7, 0., 0.0286303, 0.706848, 0., 0.0282852, 0.75,
0., 0.0287183, 0.793591, 0., 0.0287511, 0.8, 0., 0.03,
0.832036, 0., 0.0309524, 0.85, 0., 0.04, 0.880317,
0., 0.0479972, 0.9, 0., 0.05, 0.902169, 0., 0.0506499,
0.903249, 0., 0.06, 0.917023, 0., 0.0634705, 0.917352,
0., 0.07, 0.916915, 0., 0.0727888, 0.913944, 0., 0.08,
0.905785, 0., 0.0814746, 0.907373, 0., 0.09, 0.916915,
0., 0.0933178, 0.916589, 0., 0.1, 0.917023, 0., 0.10252,
0.912598, 0., 0.11, 0.902169, 0., 0.110335, 0.901676,
0., 0.112003, 0.9, 0., 0.117299, 0.886497, 0., 0.12, 0.880317,
0., 0.123646, 0.868231, 0., 0.129048, 0.85, 0., 0.129185,
0.845923, 0., 0.13, 0.832036, 0., 0.130918, 0.80459,
0., 0.131249, 0.8, 0., 0.131673, 0.758365, 0., 0.131715, 0.75,
0., 0.13137, 0.706848, 0., 0.131316, 0.7, 0., 0.131307,
0.693466, 0., 0.13115, 0.65, 0., 0.130924, 0.604621,
0., 0.13088, 0.6, 0., 0.130787, 0.553935, 0., 0.130798, 0.55,
0., 0.130773, 0.503866, 0., 0.130751, 0.5, 0., 0.130775,
0.453875, 0., 0.130798, 0.45, 0., 0.130893, 0.404463,
0., 0.13088, 0.4, 0., 0.130924, 0.395379, 0., 0.13115, 0.35,
0., 0.131307, 0.306534, 0., 0.131316, 0.3, 0., 0.13165,
0.258251, 0., 0.131715, 0.25, 0., 0.131282, 0.206409,
0., 0.131249, 0.2, 0., 0.130918, 0.19541, 0., 0.13, 0.167964,
0., 0.129048, 0.15, 0., 0.12, 0.119683, 0., 0.117299,
0.113503, 0., 0.112003, 0.1, 0., 0.110335, 0.0983238,
0., 0.11, 0.097831, 0., 0.10935, 0.0967508, 0., 0.1,
0.0829773, 0., 0.0965295, 0.0826475, 0., 0.09, 0.0830853,
0., 0.0814746, 0.0926271, 0., 0.08, 0.094215, 0., 0.0785254,
0.0926271, 0., 0.07, 0.0830853, 0., 0.0634705, 0.0826475,
0., 0.06, 0.0829773, 0., 0.0574805, 0.0874023, 0., 0.05,
0.097831, 0., 0.0496648, 0.0983238, 0., 0.0479972, 0.1,
0., 0.04, 0.119683, 0., 0.0363538, 0.131769, 0., 0.0309524,
0.15, 0., 0.0308154, 0.154077, 0., 0.03, 0.167964,
0., 0.029082, 0.19541, 0., 0.0287511, 0.2, 0., 0.0283271,
0.241635, 0., 0.0282852, 0.25, 0., 0.0286303, 0.293152,
0., 0.028684, 0.3, 0., 0.028842, 0.34421, 0., 0.0288502, 0.35,
0., 0.0290759, 0.395379, 0., 0.0291196, 0.4, 0., 0.029213,
0.446065, 0., 0.0292019, 0.45, 0., 0.0292269, 0.496134,
0., 0.0292492, 0.5, 0., 0.0292249, 0.546125, 0., 0.0292019,
0.55, 0., 0.0291073, 0.595537, 0., 0.0291196, 0.6,
0., 0.0289033, 0.644517, 0., 0.0288502, 0.65, 0., 0.0286931,
0.693466, 0., 0.028684, 0.7, 0.
If he uses the ReplacePart function, the effect is not what it should be (i want) - it's below.
After the whole operation, I would like to view the points using ListPlot3D.
Could someone help me with this issue?
ReplacePart[Y09POINTS, 3 -> 0.08]
0.028684, 0.7, 0., 0.0286303, 0.706848, 0., 0.08, 0.0287183,
0.793591, 0., 0.0287511, 0.8, 0., 0.03, 0.832036,
0., 0.0309524, 0.85, 0., 0.04, 0.880317, 0., 0.0479972, 0.9,
0., 0.05, 0.902169, 0., 0.0506499, 0.903249, 0., 0.06,
0.917023, 0., 0.0634705, 0.917352, 0., 0.07, 0.916915,
0., 0.0727888, 0.913944, 0., 0.08, 0.905785, 0., 0.0814746,
0.907373, 0., 0.09, 0.916915, 0., 0.0933178, 0.916589,
0., 0.1, 0.917023, 0., 0.10252, 0.912598, 0., 0.11, 0.902169,
0., 0.110335, 0.901676, 0., 0.112003, 0.9, 0., 0.117299,
0.886497, 0., 0.12, 0.880317, 0., 0.123646, 0.868231,
0., 0.129048, 0.85, 0., 0.129185, 0.845923, 0., 0.13,
0.832036, 0., 0.130918, 0.80459, 0., 0.131249, 0.8,
0., 0.131673, 0.758365, 0., 0.131715, 0.75, 0., 0.13137,
0.706848, 0., 0.131316, 0.7, 0., 0.131307, 0.693466,
0., 0.13115, 0.65, 0., 0.130924, 0.604621, 0., 0.13088, 0.6,
0., 0.130787, 0.553935, 0., 0.130798, 0.55, 0., 0.130773,
0.503866, 0., 0.130751, 0.5, 0., 0.130775, 0.453875,
0., 0.130798, 0.45, 0., 0.130893, 0.404463, 0., 0.13088, 0.4,
0., 0.130924, 0.395379, 0., 0.13115, 0.35, 0., 0.131307,
0.306534, 0., 0.131316, 0.3, 0., 0.13165, 0.258251,
0., 0.131715, 0.25, 0., 0.131282, 0.206409, 0., 0.131249, 0.2,
0., 0.130918, 0.19541, 0., 0.13, 0.167964, 0., 0.129048,
0.15, 0., 0.12, 0.119683, 0., 0.117299, 0.113503,
0., 0.112003, 0.1, 0., 0.110335, 0.0983238, 0., 0.11,
0.097831, 0., 0.10935, 0.0967508, 0., 0.1, 0.0829773,
0., 0.0965295, 0.0826475, 0., 0.09, 0.0830853, 0., 0.0814746,
0.0926271, 0., 0.08, 0.094215, 0., 0.0785254, 0.0926271,
0., 0.07, 0.0830853, 0., 0.0634705, 0.0826475, 0., 0.06,
0.0829773, 0., 0.0574805, 0.0874023, 0., 0.05, 0.097831,
0., 0.0496648, 0.0983238, 0., 0.0479972, 0.1, 0., 0.04,
0.119683, 0., 0.0363538, 0.131769, 0., 0.0309524, 0.15,
0., 0.0308154, 0.154077, 0., 0.03, 0.167964, 0., 0.029082,
0.19541, 0., 0.0287511, 0.2, 0., 0.0283271, 0.241635,
0., 0.0282852, 0.25, 0., 0.0286303, 0.293152, 0., 0.028684,
0.3, 0., 0.028842, 0.34421, 0., 0.0288502, 0.35,
0., 0.0290759, 0.395379, 0., 0.0291196, 0.4, 0., 0.029213,
0.446065, 0., 0.0292019, 0.45, 0., 0.0292269, 0.496134,
0., 0.0292492, 0.5, 0., 0.0292249, 0.546125, 0., 0.0292019,
0.55, 0., 0.0291073, 0.595537, 0., 0.0291196, 0.6,
0., 0.0289033, 0.644517, 0., 0.0288502, 0.65, 0., 0.0286931,
0.693466, 0., 0.028684, 0.7, 0.
list-manipulation
asked 1 hour ago
Arek
133
New contributor
Arek is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
1
TryTranslationTransform[0, 0, 0.08][Y09POINTS].
– J. M. is computer-less♦
1 hour ago
Thank you @ J. M. is computer-less Method works - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago
add a comment |Â
up vote
1
down vote
favorite
up vote
1
down vote
favorite
I have a question about the list of points - in the list below I would like to change the 3rd value of each point to another - like this:
x, y, 0 to (x, y, 0.08}
Y09POINTS=0.028684, 0.7, 0., 0.0286303, 0.706848, 0., 0.0282852, 0.75,
0., 0.0287183, 0.793591, 0., 0.0287511, 0.8, 0., 0.03,
0.832036, 0., 0.0309524, 0.85, 0., 0.04, 0.880317,
0., 0.0479972, 0.9, 0., 0.05, 0.902169, 0., 0.0506499,
0.903249, 0., 0.06, 0.917023, 0., 0.0634705, 0.917352,
0., 0.07, 0.916915, 0., 0.0727888, 0.913944, 0., 0.08,
0.905785, 0., 0.0814746, 0.907373, 0., 0.09, 0.916915,
0., 0.0933178, 0.916589, 0., 0.1, 0.917023, 0., 0.10252,
0.912598, 0., 0.11, 0.902169, 0., 0.110335, 0.901676,
0., 0.112003, 0.9, 0., 0.117299, 0.886497, 0., 0.12, 0.880317,
0., 0.123646, 0.868231, 0., 0.129048, 0.85, 0., 0.129185,
0.845923, 0., 0.13, 0.832036, 0., 0.130918, 0.80459,
0., 0.131249, 0.8, 0., 0.131673, 0.758365, 0., 0.131715, 0.75,
0., 0.13137, 0.706848, 0., 0.131316, 0.7, 0., 0.131307,
0.693466, 0., 0.13115, 0.65, 0., 0.130924, 0.604621,
0., 0.13088, 0.6, 0., 0.130787, 0.553935, 0., 0.130798, 0.55,
0., 0.130773, 0.503866, 0., 0.130751, 0.5, 0., 0.130775,
0.453875, 0., 0.130798, 0.45, 0., 0.130893, 0.404463,
0., 0.13088, 0.4, 0., 0.130924, 0.395379, 0., 0.13115, 0.35,
0., 0.131307, 0.306534, 0., 0.131316, 0.3, 0., 0.13165,
0.258251, 0., 0.131715, 0.25, 0., 0.131282, 0.206409,
0., 0.131249, 0.2, 0., 0.130918, 0.19541, 0., 0.13, 0.167964,
0., 0.129048, 0.15, 0., 0.12, 0.119683, 0., 0.117299,
0.113503, 0., 0.112003, 0.1, 0., 0.110335, 0.0983238,
0., 0.11, 0.097831, 0., 0.10935, 0.0967508, 0., 0.1,
0.0829773, 0., 0.0965295, 0.0826475, 0., 0.09, 0.0830853,
0., 0.0814746, 0.0926271, 0., 0.08, 0.094215, 0., 0.0785254,
0.0926271, 0., 0.07, 0.0830853, 0., 0.0634705, 0.0826475,
0., 0.06, 0.0829773, 0., 0.0574805, 0.0874023, 0., 0.05,
0.097831, 0., 0.0496648, 0.0983238, 0., 0.0479972, 0.1,
0., 0.04, 0.119683, 0., 0.0363538, 0.131769, 0., 0.0309524,
0.15, 0., 0.0308154, 0.154077, 0., 0.03, 0.167964,
0., 0.029082, 0.19541, 0., 0.0287511, 0.2, 0., 0.0283271,
0.241635, 0., 0.0282852, 0.25, 0., 0.0286303, 0.293152,
0., 0.028684, 0.3, 0., 0.028842, 0.34421, 0., 0.0288502, 0.35,
0., 0.0290759, 0.395379, 0., 0.0291196, 0.4, 0., 0.029213,
0.446065, 0., 0.0292019, 0.45, 0., 0.0292269, 0.496134,
0., 0.0292492, 0.5, 0., 0.0292249, 0.546125, 0., 0.0292019,
0.55, 0., 0.0291073, 0.595537, 0., 0.0291196, 0.6,
0., 0.0289033, 0.644517, 0., 0.0288502, 0.65, 0., 0.0286931,
0.693466, 0., 0.028684, 0.7, 0.
If he uses the ReplacePart function, the effect is not what it should be (i want) - it's below.
After the whole operation, I would like to view the points using ListPlot3D.
Could someone help me with this issue?
ReplacePart[Y09POINTS, 3 -> 0.08]
0.028684, 0.7, 0., 0.0286303, 0.706848, 0., 0.08, 0.0287183,
0.793591, 0., 0.0287511, 0.8, 0., 0.03, 0.832036,
0., 0.0309524, 0.85, 0., 0.04, 0.880317, 0., 0.0479972, 0.9,
0., 0.05, 0.902169, 0., 0.0506499, 0.903249, 0., 0.06,
0.917023, 0., 0.0634705, 0.917352, 0., 0.07, 0.916915,
0., 0.0727888, 0.913944, 0., 0.08, 0.905785, 0., 0.0814746,
0.907373, 0., 0.09, 0.916915, 0., 0.0933178, 0.916589,
0., 0.1, 0.917023, 0., 0.10252, 0.912598, 0., 0.11, 0.902169,
0., 0.110335, 0.901676, 0., 0.112003, 0.9, 0., 0.117299,
0.886497, 0., 0.12, 0.880317, 0., 0.123646, 0.868231,
0., 0.129048, 0.85, 0., 0.129185, 0.845923, 0., 0.13,
0.832036, 0., 0.130918, 0.80459, 0., 0.131249, 0.8,
0., 0.131673, 0.758365, 0., 0.131715, 0.75, 0., 0.13137,
0.706848, 0., 0.131316, 0.7, 0., 0.131307, 0.693466,
0., 0.13115, 0.65, 0., 0.130924, 0.604621, 0., 0.13088, 0.6,
0., 0.130787, 0.553935, 0., 0.130798, 0.55, 0., 0.130773,
0.503866, 0., 0.130751, 0.5, 0., 0.130775, 0.453875,
0., 0.130798, 0.45, 0., 0.130893, 0.404463, 0., 0.13088, 0.4,
0., 0.130924, 0.395379, 0., 0.13115, 0.35, 0., 0.131307,
0.306534, 0., 0.131316, 0.3, 0., 0.13165, 0.258251,
0., 0.131715, 0.25, 0., 0.131282, 0.206409, 0., 0.131249, 0.2,
0., 0.130918, 0.19541, 0., 0.13, 0.167964, 0., 0.129048,
0.15, 0., 0.12, 0.119683, 0., 0.117299, 0.113503,
0., 0.112003, 0.1, 0., 0.110335, 0.0983238, 0., 0.11,
0.097831, 0., 0.10935, 0.0967508, 0., 0.1, 0.0829773,
0., 0.0965295, 0.0826475, 0., 0.09, 0.0830853, 0., 0.0814746,
0.0926271, 0., 0.08, 0.094215, 0., 0.0785254, 0.0926271,
0., 0.07, 0.0830853, 0., 0.0634705, 0.0826475, 0., 0.06,
0.0829773, 0., 0.0574805, 0.0874023, 0., 0.05, 0.097831,
0., 0.0496648, 0.0983238, 0., 0.0479972, 0.1, 0., 0.04,
0.119683, 0., 0.0363538, 0.131769, 0., 0.0309524, 0.15,
0., 0.0308154, 0.154077, 0., 0.03, 0.167964, 0., 0.029082,
0.19541, 0., 0.0287511, 0.2, 0., 0.0283271, 0.241635,
0., 0.0282852, 0.25, 0., 0.0286303, 0.293152, 0., 0.028684,
0.3, 0., 0.028842, 0.34421, 0., 0.0288502, 0.35,
0., 0.0290759, 0.395379, 0., 0.0291196, 0.4, 0., 0.029213,
0.446065, 0., 0.0292019, 0.45, 0., 0.0292269, 0.496134,
0., 0.0292492, 0.5, 0., 0.0292249, 0.546125, 0., 0.0292019,
0.55, 0., 0.0291073, 0.595537, 0., 0.0291196, 0.6,
0., 0.0289033, 0.644517, 0., 0.0288502, 0.65, 0., 0.0286931,
0.693466, 0., 0.028684, 0.7, 0.
list-manipulation
asked 1 hour ago
Arek
133
New contributor
Arek is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I have a question about the list of points - in the list below I would like to change the 3rd value of each point to another - like this:
x, y, 0 to (x, y, 0.08}
Y09POINTS=0.028684, 0.7, 0., 0.0286303, 0.706848, 0., 0.0282852, 0.75,
0., 0.0287183, 0.793591, 0., 0.0287511, 0.8, 0., 0.03,
0.832036, 0., 0.0309524, 0.85, 0., 0.04, 0.880317,
0., 0.0479972, 0.9, 0., 0.05, 0.902169, 0., 0.0506499,
0.903249, 0., 0.06, 0.917023, 0., 0.0634705, 0.917352,
0., 0.07, 0.916915, 0., 0.0727888, 0.913944, 0., 0.08,
0.905785, 0., 0.0814746, 0.907373, 0., 0.09, 0.916915,
0., 0.0933178, 0.916589, 0., 0.1, 0.917023, 0., 0.10252,
0.912598, 0., 0.11, 0.902169, 0., 0.110335, 0.901676,
0., 0.112003, 0.9, 0., 0.117299, 0.886497, 0., 0.12, 0.880317,
0., 0.123646, 0.868231, 0., 0.129048, 0.85, 0., 0.129185,
0.845923, 0., 0.13, 0.832036, 0., 0.130918, 0.80459,
0., 0.131249, 0.8, 0., 0.131673, 0.758365, 0., 0.131715, 0.75,
0., 0.13137, 0.706848, 0., 0.131316, 0.7, 0., 0.131307,
0.693466, 0., 0.13115, 0.65, 0., 0.130924, 0.604621,
0., 0.13088, 0.6, 0., 0.130787, 0.553935, 0., 0.130798, 0.55,
0., 0.130773, 0.503866, 0., 0.130751, 0.5, 0., 0.130775,
0.453875, 0., 0.130798, 0.45, 0., 0.130893, 0.404463,
0., 0.13088, 0.4, 0., 0.130924, 0.395379, 0., 0.13115, 0.35,
0., 0.131307, 0.306534, 0., 0.131316, 0.3, 0., 0.13165,
0.258251, 0., 0.131715, 0.25, 0., 0.131282, 0.206409,
0., 0.131249, 0.2, 0., 0.130918, 0.19541, 0., 0.13, 0.167964,
0., 0.129048, 0.15, 0., 0.12, 0.119683, 0., 0.117299,
0.113503, 0., 0.112003, 0.1, 0., 0.110335, 0.0983238,
0., 0.11, 0.097831, 0., 0.10935, 0.0967508, 0., 0.1,
0.0829773, 0., 0.0965295, 0.0826475, 0., 0.09, 0.0830853,
0., 0.0814746, 0.0926271, 0., 0.08, 0.094215, 0., 0.0785254,
0.0926271, 0., 0.07, 0.0830853, 0., 0.0634705, 0.0826475,
0., 0.06, 0.0829773, 0., 0.0574805, 0.0874023, 0., 0.05,
0.097831, 0., 0.0496648, 0.0983238, 0., 0.0479972, 0.1,
0., 0.04, 0.119683, 0., 0.0363538, 0.131769, 0., 0.0309524,
0.15, 0., 0.0308154, 0.154077, 0., 0.03, 0.167964,
0., 0.029082, 0.19541, 0., 0.0287511, 0.2, 0., 0.0283271,
0.241635, 0., 0.0282852, 0.25, 0., 0.0286303, 0.293152,
0., 0.028684, 0.3, 0., 0.028842, 0.34421, 0., 0.0288502, 0.35,
0., 0.0290759, 0.395379, 0., 0.0291196, 0.4, 0., 0.029213,
0.446065, 0., 0.0292019, 0.45, 0., 0.0292269, 0.496134,
0., 0.0292492, 0.5, 0., 0.0292249, 0.546125, 0., 0.0292019,
0.55, 0., 0.0291073, 0.595537, 0., 0.0291196, 0.6,
0., 0.0289033, 0.644517, 0., 0.0288502, 0.65, 0., 0.0286931,
0.693466, 0., 0.028684, 0.7, 0.
If he uses the ReplacePart function, the effect is not what it should be (i want) - it's below.
After the whole operation, I would like to view the points using ListPlot3D.
Could someone help me with this issue?
ReplacePart[Y09POINTS, 3 -> 0.08]
0.028684, 0.7, 0., 0.0286303, 0.706848, 0., 0.08, 0.0287183,
0.793591, 0., 0.0287511, 0.8, 0., 0.03, 0.832036,
0., 0.0309524, 0.85, 0., 0.04, 0.880317, 0., 0.0479972, 0.9,
0., 0.05, 0.902169, 0., 0.0506499, 0.903249, 0., 0.06,
0.917023, 0., 0.0634705, 0.917352, 0., 0.07, 0.916915,
0., 0.0727888, 0.913944, 0., 0.08, 0.905785, 0., 0.0814746,
0.907373, 0., 0.09, 0.916915, 0., 0.0933178, 0.916589,
0., 0.1, 0.917023, 0., 0.10252, 0.912598, 0., 0.11, 0.902169,
0., 0.110335, 0.901676, 0., 0.112003, 0.9, 0., 0.117299,
0.886497, 0., 0.12, 0.880317, 0., 0.123646, 0.868231,
0., 0.129048, 0.85, 0., 0.129185, 0.845923, 0., 0.13,
0.832036, 0., 0.130918, 0.80459, 0., 0.131249, 0.8,
0., 0.131673, 0.758365, 0., 0.131715, 0.75, 0., 0.13137,
0.706848, 0., 0.131316, 0.7, 0., 0.131307, 0.693466,
0., 0.13115, 0.65, 0., 0.130924, 0.604621, 0., 0.13088, 0.6,
0., 0.130787, 0.553935, 0., 0.130798, 0.55, 0., 0.130773,
0.503866, 0., 0.130751, 0.5, 0., 0.130775, 0.453875,
0., 0.130798, 0.45, 0., 0.130893, 0.404463, 0., 0.13088, 0.4,
0., 0.130924, 0.395379, 0., 0.13115, 0.35, 0., 0.131307,
0.306534, 0., 0.131316, 0.3, 0., 0.13165, 0.258251,
0., 0.131715, 0.25, 0., 0.131282, 0.206409, 0., 0.131249, 0.2,
0., 0.130918, 0.19541, 0., 0.13, 0.167964, 0., 0.129048,
0.15, 0., 0.12, 0.119683, 0., 0.117299, 0.113503,
0., 0.112003, 0.1, 0., 0.110335, 0.0983238, 0., 0.11,
0.097831, 0., 0.10935, 0.0967508, 0., 0.1, 0.0829773,
0., 0.0965295, 0.0826475, 0., 0.09, 0.0830853, 0., 0.0814746,
0.0926271, 0., 0.08, 0.094215, 0., 0.0785254, 0.0926271,
0., 0.07, 0.0830853, 0., 0.0634705, 0.0826475, 0., 0.06,
0.0829773, 0., 0.0574805, 0.0874023, 0., 0.05, 0.097831,
0., 0.0496648, 0.0983238, 0., 0.0479972, 0.1, 0., 0.04,
0.119683, 0., 0.0363538, 0.131769, 0., 0.0309524, 0.15,
0., 0.0308154, 0.154077, 0., 0.03, 0.167964, 0., 0.029082,
0.19541, 0., 0.0287511, 0.2, 0., 0.0283271, 0.241635,
0., 0.0282852, 0.25, 0., 0.0286303, 0.293152, 0., 0.028684,
0.3, 0., 0.028842, 0.34421, 0., 0.0288502, 0.35,
0., 0.0290759, 0.395379, 0., 0.0291196, 0.4, 0., 0.029213,
0.446065, 0., 0.0292019, 0.45, 0., 0.0292269, 0.496134,
0., 0.0292492, 0.5, 0., 0.0292249, 0.546125, 0., 0.0292019,
0.55, 0., 0.0291073, 0.595537, 0., 0.0291196, 0.6,
0., 0.0289033, 0.644517, 0., 0.0288502, 0.65, 0., 0.0286931,
0.693466, 0., 0.028684, 0.7, 0.
list-manipulation
list-manipulation
asked 1 hour ago
Arek
133
New contributor
Arek is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 1 hour ago
Arek
133
New contributor
Arek is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 1 hour ago
Arek
133
New contributor
Arek is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 1 hour ago
Arek
133
asked 1 hour ago
Arek
133
133
New contributor
Arek is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Arek is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Arek is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
1
TryTranslationTransform[0, 0, 0.08][Y09POINTS].
– J. M. is computer-less♦
1 hour ago
Thank you @ J. M. is computer-less Method works - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago
add a comment |Â
1
TryTranslationTransform[0, 0, 0.08][Y09POINTS].
– J. M. is computer-less♦
1 hour ago
Thank you @ J. M. is computer-less Method works - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago
1
1
Try
TranslationTransform[0, 0, 0.08][Y09POINTS].– J. M. is computer-less♦
1 hour ago
Try
TranslationTransform[0, 0, 0.08][Y09POINTS].– J. M. is computer-less♦
1 hour ago
Thank you @ J. M. is computer-less Method works - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago
Thank you @ J. M. is computer-less Method works - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago
add a comment |Â
3 Answers
3
active
oldest
votes
up vote
2
down vote
You can try this instead:
a = Y09POINTS;
a[[All,3]] = 0.08;
Then a contains the desired result.
You can also use ReplacePart[p, _, 3 -> 0.08] but I would not suggest that; it is pretty slow (slower by two orders of mangnitude).
answered 1 hour ago
Henrik Schumacher
41.8k260125
Thank you @Henrik Schumacher Both methods work - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago
add a comment |Â
up vote
1
down vote
ArrayFlatten@Y09POINTS[[All, ;; 2]], 0.08
answered 16 mins ago
user1066
6,03821832
add a comment |Â
up vote
1
down vote
# + 0., 0., 0.08 & /@ Y09POINTS
Or, though slower,
# + ConstantArray[0., 0., 0.08, Length@#] &@Y09POINTS
answered 15 mins ago
That Gravity Guy
1,653514
add a comment |Â
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
2
down vote
You can try this instead:
a = Y09POINTS;
a[[All,3]] = 0.08;
Then a contains the desired result.
You can also use ReplacePart[p, _, 3 -> 0.08] but I would not suggest that; it is pretty slow (slower by two orders of mangnitude).
answered 1 hour ago
Henrik Schumacher
41.8k260125
Thank you @Henrik Schumacher Both methods work - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago
add a comment |Â
up vote
2
down vote
You can try this instead:
a = Y09POINTS;
a[[All,3]] = 0.08;
Then a contains the desired result.
You can also use ReplacePart[p, _, 3 -> 0.08] but I would not suggest that; it is pretty slow (slower by two orders of mangnitude).
answered 1 hour ago
Henrik Schumacher
41.8k260125
Thank you @Henrik Schumacher Both methods work - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago
add a comment |Â
up vote
2
down vote
up vote
2
down vote
You can try this instead:
a = Y09POINTS;
a[[All,3]] = 0.08;
Then a contains the desired result.
You can also use ReplacePart[p, _, 3 -> 0.08] but I would not suggest that; it is pretty slow (slower by two orders of mangnitude).
answered 1 hour ago
Henrik Schumacher
41.8k260125
You can try this instead:
a = Y09POINTS;
a[[All,3]] = 0.08;
Then a contains the desired result.
You can also use ReplacePart[p, _, 3 -> 0.08] but I would not suggest that; it is pretty slow (slower by two orders of mangnitude).
answered 1 hour ago
Henrik Schumacher
41.8k260125
answered 1 hour ago
Henrik Schumacher
41.8k260125
answered 1 hour ago
Henrik Schumacher
41.8k260125
answered 1 hour ago
Henrik Schumacher
41.8k260125
41.8k260125
Thank you @Henrik Schumacher Both methods work - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago
add a comment |Â
Thank you @Henrik Schumacher Both methods work - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago
Thank you @Henrik Schumacher Both methods work - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago
Thank you @Henrik Schumacher Both methods work - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago
add a comment |Â
up vote
1
down vote
ArrayFlatten@Y09POINTS[[All, ;; 2]], 0.08
answered 16 mins ago
user1066
6,03821832
add a comment |Â
up vote
1
down vote
ArrayFlatten@Y09POINTS[[All, ;; 2]], 0.08
answered 16 mins ago
user1066
6,03821832
add a comment |Â
up vote
1
down vote
up vote
1
down vote
ArrayFlatten@Y09POINTS[[All, ;; 2]], 0.08
answered 16 mins ago
user1066
6,03821832
ArrayFlatten@Y09POINTS[[All, ;; 2]], 0.08
answered 16 mins ago
user1066
6,03821832
answered 16 mins ago
user1066
6,03821832
answered 16 mins ago
user1066
6,03821832
answered 16 mins ago
user1066
6,03821832
6,03821832
add a comment |Â
add a comment |Â
up vote
1
down vote
# + 0., 0., 0.08 & /@ Y09POINTS
Or, though slower,
# + ConstantArray[0., 0., 0.08, Length@#] &@Y09POINTS
answered 15 mins ago
That Gravity Guy
1,653514
add a comment |Â
up vote
1
down vote
# + 0., 0., 0.08 & /@ Y09POINTS
Or, though slower,
# + ConstantArray[0., 0., 0.08, Length@#] &@Y09POINTS
answered 15 mins ago
That Gravity Guy
1,653514
add a comment |Â
up vote
1
down vote
up vote
1
down vote
# + 0., 0., 0.08 & /@ Y09POINTS
Or, though slower,
# + ConstantArray[0., 0., 0.08, Length@#] &@Y09POINTS
answered 15 mins ago
That Gravity Guy
1,653514
# + 0., 0., 0.08 & /@ Y09POINTS
Or, though slower,
# + ConstantArray[0., 0., 0.08, Length@#] &@Y09POINTS
answered 15 mins ago
That Gravity Guy
1,653514
answered 15 mins ago
That Gravity Guy
1,653514
answered 15 mins ago
That Gravity Guy
1,653514
answered 15 mins ago
That Gravity Guy
1,653514
1,653514
add a comment |Â
add a comment |Â
Arek is a new contributor. Be nice, and check out our Code of Conduct.
Â
draft saved
draft discarded
Arek is a new contributor. Be nice, and check out our Code of Conduct.
Arek is a new contributor. Be nice, and check out our Code of Conduct.
Arek is a new contributor. Be nice, and check out our Code of Conduct.
Â
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmathematica.stackexchange.com%2fquestions%2f183841%2freplace-part-of-the-element-in-a-list-of-points%23new-answer', 'question_page');
);
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
1
Try
TranslationTransform[0, 0, 0.08][Y09POINTS].– J. M. is computer-less♦
1 hour ago
Thank you @ J. M. is computer-less Method works - if I have a larger part of the results, I will also test the performance and I will refer :)
– Arek
1 hour ago