Mixing
Would this chair support astronaut during launch in Crew Dragon
Clash Royale CLAN TAG#URR8PPP
up vote
25
down vote
favorite
Recently reporters were allowed to take pictures of Crew Dragon and the SpaceX flight suit. Among them is this picture:
I was under the impression that:
Chairs needed to be custom molded / adjusted for the astronauts. There's stories of people sitting down in bathtubs of foam to create the perfect shape. This doesn't look highly adjustible, it looks like a racecar seat.
The seats need to support the entire body for the acceleration during launch and landing. This seat looks like the upper body and head are supported but it doesn't look like the legs are supported. Wouldn't this be extremely uncomfortable for the astronauts and endanger their legs at high accelerations?
Was I incorrect?
spacex crewed-spaceflight dragon dragon-v2
edited Aug 14 at 18:36
Machavity
1,6271731
asked Aug 14 at 7:55
Dragongeek
2,291725
add a comment |Â
up vote
25
down vote
favorite
Recently reporters were allowed to take pictures of Crew Dragon and the SpaceX flight suit. Among them is this picture:
I was under the impression that:
Chairs needed to be custom molded / adjusted for the astronauts. There's stories of people sitting down in bathtubs of foam to create the perfect shape. This doesn't look highly adjustible, it looks like a racecar seat.
The seats need to support the entire body for the acceleration during launch and landing. This seat looks like the upper body and head are supported but it doesn't look like the legs are supported. Wouldn't this be extremely uncomfortable for the astronauts and endanger their legs at high accelerations?
Was I incorrect?
spacex crewed-spaceflight dragon dragon-v2
edited Aug 14 at 18:36
Machavity
1,6271731
asked Aug 14 at 7:55
Dragongeek
2,291725
1
It's worth noting that the pictures in the article come from 2 capsules - one is "SpaceX’s Crew Dragon simulator, a near-exact replica of the spacecraft built for astronaut training", and the other is "A less exact model of Crew Dragon meant for display purposes" - the picture you've included is from the display model.
– Zac Faragher
Aug 15 at 2:34
Its worth noting that professional race car seats are custom fit. F1 seats have a similar profile to this.
– Gusdor
Aug 15 at 9:44
add a comment |Â
up vote
25
down vote
favorite
up vote
25
down vote
favorite
Recently reporters were allowed to take pictures of Crew Dragon and the SpaceX flight suit. Among them is this picture:
I was under the impression that:
Chairs needed to be custom molded / adjusted for the astronauts. There's stories of people sitting down in bathtubs of foam to create the perfect shape. This doesn't look highly adjustible, it looks like a racecar seat.
The seats need to support the entire body for the acceleration during launch and landing. This seat looks like the upper body and head are supported but it doesn't look like the legs are supported. Wouldn't this be extremely uncomfortable for the astronauts and endanger their legs at high accelerations?
Was I incorrect?
spacex crewed-spaceflight dragon dragon-v2
edited Aug 14 at 18:36
Machavity
1,6271731
asked Aug 14 at 7:55
Dragongeek
2,291725
Recently reporters were allowed to take pictures of Crew Dragon and the SpaceX flight suit. Among them is this picture:
I was under the impression that:
Chairs needed to be custom molded / adjusted for the astronauts. There's stories of people sitting down in bathtubs of foam to create the perfect shape. This doesn't look highly adjustible, it looks like a racecar seat.
The seats need to support the entire body for the acceleration during launch and landing. This seat looks like the upper body and head are supported but it doesn't look like the legs are supported. Wouldn't this be extremely uncomfortable for the astronauts and endanger their legs at high accelerations?
Was I incorrect?
spacex crewed-spaceflight dragon dragon-v2
edited Aug 14 at 18:36
Machavity
1,6271731
asked Aug 14 at 7:55
Dragongeek
2,291725
edited Aug 14 at 18:36
Machavity
1,6271731
edited Aug 14 at 18:36
Machavity
1,6271731
edited Aug 14 at 18:36
Machavity
1,6271731
1,6271731
asked Aug 14 at 7:55
Dragongeek
2,291725
asked Aug 14 at 7:55
Dragongeek
2,291725
asked Aug 14 at 7:55
Dragongeek
2,291725
2,291725
1
It's worth noting that the pictures in the article come from 2 capsules - one is "SpaceX’s Crew Dragon simulator, a near-exact replica of the spacecraft built for astronaut training", and the other is "A less exact model of Crew Dragon meant for display purposes" - the picture you've included is from the display model.
– Zac Faragher
Aug 15 at 2:34
Its worth noting that professional race car seats are custom fit. F1 seats have a similar profile to this.
– Gusdor
Aug 15 at 9:44
add a comment |Â
1
It's worth noting that the pictures in the article come from 2 capsules - one is "SpaceX’s Crew Dragon simulator, a near-exact replica of the spacecraft built for astronaut training", and the other is "A less exact model of Crew Dragon meant for display purposes" - the picture you've included is from the display model.
– Zac Faragher
Aug 15 at 2:34
Its worth noting that professional race car seats are custom fit. F1 seats have a similar profile to this.
– Gusdor
Aug 15 at 9:44
1
1
It's worth noting that the pictures in the article come from 2 capsules - one is "SpaceX’s Crew Dragon simulator, a near-exact replica of the spacecraft built for astronaut training", and the other is "A less exact model of Crew Dragon meant for display purposes" - the picture you've included is from the display model.
– Zac Faragher
Aug 15 at 2:34
It's worth noting that the pictures in the article come from 2 capsules - one is "SpaceX’s Crew Dragon simulator, a near-exact replica of the spacecraft built for astronaut training", and the other is "A less exact model of Crew Dragon meant for display purposes" - the picture you've included is from the display model.
– Zac Faragher
Aug 15 at 2:34
Its worth noting that professional race car seats are custom fit. F1 seats have a similar profile to this.
– Gusdor
Aug 15 at 9:44
Its worth noting that professional race car seats are custom fit. F1 seats have a similar profile to this.
– Gusdor
Aug 15 at 9:44
add a comment |Â
1 Answer
1
active
oldest
votes
up vote
33
down vote
accepted
1.) Chairs needed to be custom molded / adjusted for the astronauts. There's stories of people sitting down in bathtubs of foam to create the perfect shape.
That is an extra comfort of the Soyuz spacecraft. In NASA spacecraft, the seats were "one size fits all." One of the reasons is that the 'failsafe' modes of Soyuz - launchpad abort, ballistic reentry - expose the astronauts to g-forces much higher than common in American made spacecraft; they still frequently result in injuries, but these are minimized thanks to the personally tailored seats. Although...
2.) The seats need to support the entire body for the acceleration during launch and landing. This seat looks like the upper body and head are supported but it doesn't look like the legs are supported.
Nor does it have seatbelts, which you'd think mandatory, and that hard black plastic would play a nasty number on the spine and other areas. And there's so much wiggle room for the head it would most likely result in spine injury in neck area.
But there are slots. It appears like these aren't full seats, they are just frames without lining - just structural support for actual seats, which may be personally molded - and would probably incorporate leg backing plates.
answered Aug 14 at 8:30
SF.
28.9k897210
Soyuz seats don't support the legs either - but they tuck the feet in much closer to the body
– JCRM
Aug 14 at 8:40
1
This was my first thought too - just frames that will have liners fitted
– Jack
Aug 14 at 8:49
13
Worth noting that other pics show both seatbelts/straps and a head cushion/restraint, further confirming that this is probably just a frame.
– James Thorpe
Aug 14 at 10:26
@JamesThorpe - those pics also show the foot rest has what appears to be mounting points for the boots of the suits to click into. Not sure you'd even need a back-plate for the legs?
– mccdyl001
Aug 14 at 11:56
11
@MartinBonner: If you enter a spin, you really wish for a seatbelt, especially if you need to reach for controls to stabilize the craft. And if you're in microgravity, you don't need heavyweight seatbelts but you definitely wish for some means of not floating out of the seat.
– SF.
Aug 14 at 12:24
 |Â
show 4 more comments
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
33
down vote
accepted
1.) Chairs needed to be custom molded / adjusted for the astronauts. There's stories of people sitting down in bathtubs of foam to create the perfect shape.
That is an extra comfort of the Soyuz spacecraft. In NASA spacecraft, the seats were "one size fits all." One of the reasons is that the 'failsafe' modes of Soyuz - launchpad abort, ballistic reentry - expose the astronauts to g-forces much higher than common in American made spacecraft; they still frequently result in injuries, but these are minimized thanks to the personally tailored seats. Although...
2.) The seats need to support the entire body for the acceleration during launch and landing. This seat looks like the upper body and head are supported but it doesn't look like the legs are supported.
Nor does it have seatbelts, which you'd think mandatory, and that hard black plastic would play a nasty number on the spine and other areas. And there's so much wiggle room for the head it would most likely result in spine injury in neck area.
But there are slots. It appears like these aren't full seats, they are just frames without lining - just structural support for actual seats, which may be personally molded - and would probably incorporate leg backing plates.
answered Aug 14 at 8:30
SF.
28.9k897210
Soyuz seats don't support the legs either - but they tuck the feet in much closer to the body
– JCRM
Aug 14 at 8:40
1
This was my first thought too - just frames that will have liners fitted
– Jack
Aug 14 at 8:49
13
Worth noting that other pics show both seatbelts/straps and a head cushion/restraint, further confirming that this is probably just a frame.
– James Thorpe
Aug 14 at 10:26
@JamesThorpe - those pics also show the foot rest has what appears to be mounting points for the boots of the suits to click into. Not sure you'd even need a back-plate for the legs?
– mccdyl001
Aug 14 at 11:56
11
@MartinBonner: If you enter a spin, you really wish for a seatbelt, especially if you need to reach for controls to stabilize the craft. And if you're in microgravity, you don't need heavyweight seatbelts but you definitely wish for some means of not floating out of the seat.
– SF.
Aug 14 at 12:24
 |Â
show 4 more comments
up vote
33
down vote
accepted
1.) Chairs needed to be custom molded / adjusted for the astronauts. There's stories of people sitting down in bathtubs of foam to create the perfect shape.
That is an extra comfort of the Soyuz spacecraft. In NASA spacecraft, the seats were "one size fits all." One of the reasons is that the 'failsafe' modes of Soyuz - launchpad abort, ballistic reentry - expose the astronauts to g-forces much higher than common in American made spacecraft; they still frequently result in injuries, but these are minimized thanks to the personally tailored seats. Although...
2.) The seats need to support the entire body for the acceleration during launch and landing. This seat looks like the upper body and head are supported but it doesn't look like the legs are supported.
Nor does it have seatbelts, which you'd think mandatory, and that hard black plastic would play a nasty number on the spine and other areas. And there's so much wiggle room for the head it would most likely result in spine injury in neck area.
But there are slots. It appears like these aren't full seats, they are just frames without lining - just structural support for actual seats, which may be personally molded - and would probably incorporate leg backing plates.
answered Aug 14 at 8:30
SF.
28.9k897210
Soyuz seats don't support the legs either - but they tuck the feet in much closer to the body
– JCRM
Aug 14 at 8:40
1
This was my first thought too - just frames that will have liners fitted
– Jack
Aug 14 at 8:49
13
Worth noting that other pics show both seatbelts/straps and a head cushion/restraint, further confirming that this is probably just a frame.
– James Thorpe
Aug 14 at 10:26
@JamesThorpe - those pics also show the foot rest has what appears to be mounting points for the boots of the suits to click into. Not sure you'd even need a back-plate for the legs?
– mccdyl001
Aug 14 at 11:56
11
@MartinBonner: If you enter a spin, you really wish for a seatbelt, especially if you need to reach for controls to stabilize the craft. And if you're in microgravity, you don't need heavyweight seatbelts but you definitely wish for some means of not floating out of the seat.
– SF.
Aug 14 at 12:24
 |Â
show 4 more comments
up vote
33
down vote
accepted
up vote
33
down vote
accepted
1.) Chairs needed to be custom molded / adjusted for the astronauts. There's stories of people sitting down in bathtubs of foam to create the perfect shape.
That is an extra comfort of the Soyuz spacecraft. In NASA spacecraft, the seats were "one size fits all." One of the reasons is that the 'failsafe' modes of Soyuz - launchpad abort, ballistic reentry - expose the astronauts to g-forces much higher than common in American made spacecraft; they still frequently result in injuries, but these are minimized thanks to the personally tailored seats. Although...
2.) The seats need to support the entire body for the acceleration during launch and landing. This seat looks like the upper body and head are supported but it doesn't look like the legs are supported.
Nor does it have seatbelts, which you'd think mandatory, and that hard black plastic would play a nasty number on the spine and other areas. And there's so much wiggle room for the head it would most likely result in spine injury in neck area.
But there are slots. It appears like these aren't full seats, they are just frames without lining - just structural support for actual seats, which may be personally molded - and would probably incorporate leg backing plates.
answered Aug 14 at 8:30
SF.
28.9k897210
1.) Chairs needed to be custom molded / adjusted for the astronauts. There's stories of people sitting down in bathtubs of foam to create the perfect shape.
That is an extra comfort of the Soyuz spacecraft. In NASA spacecraft, the seats were "one size fits all." One of the reasons is that the 'failsafe' modes of Soyuz - launchpad abort, ballistic reentry - expose the astronauts to g-forces much higher than common in American made spacecraft; they still frequently result in injuries, but these are minimized thanks to the personally tailored seats. Although...
2.) The seats need to support the entire body for the acceleration during launch and landing. This seat looks like the upper body and head are supported but it doesn't look like the legs are supported.
Nor does it have seatbelts, which you'd think mandatory, and that hard black plastic would play a nasty number on the spine and other areas. And there's so much wiggle room for the head it would most likely result in spine injury in neck area.
But there are slots. It appears like these aren't full seats, they are just frames without lining - just structural support for actual seats, which may be personally molded - and would probably incorporate leg backing plates.
answered Aug 14 at 8:30
SF.
28.9k897210
answered Aug 14 at 8:30
SF.
28.9k897210
answered Aug 14 at 8:30
SF.
28.9k897210
answered Aug 14 at 8:30
SF.
28.9k897210
28.9k897210
Soyuz seats don't support the legs either - but they tuck the feet in much closer to the body
– JCRM
Aug 14 at 8:40
1
This was my first thought too - just frames that will have liners fitted
– Jack
Aug 14 at 8:49
13
Worth noting that other pics show both seatbelts/straps and a head cushion/restraint, further confirming that this is probably just a frame.
– James Thorpe
Aug 14 at 10:26
@JamesThorpe - those pics also show the foot rest has what appears to be mounting points for the boots of the suits to click into. Not sure you'd even need a back-plate for the legs?
– mccdyl001
Aug 14 at 11:56
11
@MartinBonner: If you enter a spin, you really wish for a seatbelt, especially if you need to reach for controls to stabilize the craft. And if you're in microgravity, you don't need heavyweight seatbelts but you definitely wish for some means of not floating out of the seat.
– SF.
Aug 14 at 12:24
 |Â
show 4 more comments
Soyuz seats don't support the legs either - but they tuck the feet in much closer to the body
– JCRM
Aug 14 at 8:40
1
This was my first thought too - just frames that will have liners fitted
– Jack
Aug 14 at 8:49
13
Worth noting that other pics show both seatbelts/straps and a head cushion/restraint, further confirming that this is probably just a frame.
– James Thorpe
Aug 14 at 10:26
@JamesThorpe - those pics also show the foot rest has what appears to be mounting points for the boots of the suits to click into. Not sure you'd even need a back-plate for the legs?
– mccdyl001
Aug 14 at 11:56
11
@MartinBonner: If you enter a spin, you really wish for a seatbelt, especially if you need to reach for controls to stabilize the craft. And if you're in microgravity, you don't need heavyweight seatbelts but you definitely wish for some means of not floating out of the seat.
– SF.
Aug 14 at 12:24
Soyuz seats don't support the legs either - but they tuck the feet in much closer to the body
– JCRM
Aug 14 at 8:40
Soyuz seats don't support the legs either - but they tuck the feet in much closer to the body
– JCRM
Aug 14 at 8:40
1
1
This was my first thought too - just frames that will have liners fitted
– Jack
Aug 14 at 8:49
This was my first thought too - just frames that will have liners fitted
– Jack
Aug 14 at 8:49
13
13
Worth noting that other pics show both seatbelts/straps and a head cushion/restraint, further confirming that this is probably just a frame.
– James Thorpe
Aug 14 at 10:26
Worth noting that other pics show both seatbelts/straps and a head cushion/restraint, further confirming that this is probably just a frame.
– James Thorpe
Aug 14 at 10:26
@JamesThorpe - those pics also show the foot rest has what appears to be mounting points for the boots of the suits to click into. Not sure you'd even need a back-plate for the legs?
– mccdyl001
Aug 14 at 11:56
@JamesThorpe - those pics also show the foot rest has what appears to be mounting points for the boots of the suits to click into. Not sure you'd even need a back-plate for the legs?
– mccdyl001
Aug 14 at 11:56
11
11
@MartinBonner: If you enter a spin, you really wish for a seatbelt, especially if you need to reach for controls to stabilize the craft. And if you're in microgravity, you don't need heavyweight seatbelts but you definitely wish for some means of not floating out of the seat.
– SF.
Aug 14 at 12:24
@MartinBonner: If you enter a spin, you really wish for a seatbelt, especially if you need to reach for controls to stabilize the craft. And if you're in microgravity, you don't need heavyweight seatbelts but you definitely wish for some means of not floating out of the seat.
– SF.
Aug 14 at 12:24
 |Â
show 4 more comments
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f30097%2fwould-this-chair-support-astronaut-during-launch-in-crew-dragon%23new-answer', 'question_page');
);
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
1
It's worth noting that the pictures in the article come from 2 capsules - one is "SpaceX’s Crew Dragon simulator, a near-exact replica of the spacecraft built for astronaut training", and the other is "A less exact model of Crew Dragon meant for display purposes" - the picture you've included is from the display model.
– Zac Faragher
Aug 15 at 2:34
Its worth noting that professional race car seats are custom fit. F1 seats have a similar profile to this.
– Gusdor
Aug 15 at 9:44